TI introduces industry’s widest common mode, 70V, fault-protected RS-485 transceiver family

TI introduces industry’s widest common mode, 70V, fault-protected RS-485 transceiver family

Improve reliability with drop-in upgrades for industrial applications

DALLAS (December 3, 2008) – Texas Instruments (TI) (NYSE: TXN) today introduced a family of +/- 70V, fault protected RS-485 transceivers that achieve overvoltage protection with no external termination needed. These low-power devices serve as drop-in upgrades to existing RS-485 designs without costly board redesigns. The new half- and full-duplex transceivers simplify design in industrial automation, motor control and heating, ventilating, and air conditioning (HVAC) equipment. (See www.ti.com/sn65hvd1794-pr.)

The SN65HVD17xx family is designed to survive overvoltage faults, such as direct shorts to power supplies, miswiring faults, connector failures, cable crushes, and tool misapplications. The widest common mode, from -20V to -25V, allows for operation in harsh environments with large ground differences. These transceivers are offered in either a SOIC or DIP package and operate at a variety of speed grades such as 128 Kbps, 1 Mbps, and 10 Mbps to meet the needs of a variety of applications.

The SN65HVD1780/1/2 operate over a wide voltage range from 3V to 5V, enabling applications that have fluctuating power sources. The SN65HVD1794 has a cable invert pin, which allows for simple correction bus wires that were incorrectly configured. Additionally, the SN65HVD17xx family offers many integrated features such as:

Bus ESD protection +/- 16k-V JEDEC human body model

Failsafe receiver for open-circuit, short-circuit and idle-bus conditions

Power-up, power-down and glitch-free operation

Supports up to 256 or 320 nodes

The ultra low-power MSP430 microcontrollers and SN65HVD17xx family can be used together to create a low-power solution for a single control node. The SN65HVD17xx family contributes to TI’s broad interface product offering, which includes families of products for M-LVDS, LVDS, CAN, I2C, ESD, RS-485, RS-232 and PCI-Express standards. Please see www.ti.com/interface for more information.

Availability

The SN65HVD17xx family is available online today. Details and suggested resale pricing are listed below for each device in 1000-piece quantities. Samples are available at www.ti.com/sn65hvd1794-pr.

Part Number

Signaling Rate

Duplex

Features

Package

Price

SN65HVD1780

115 Kbps

Half

3V to 5V VCC

SOIC/DIP

$1.85

SN65HVD1781

1 Mbps

Half

3V to 5V VCC

SOIC/DIP

$1.85

SN65HVD1782

10 Mbps

Half

3V to 5V VCC

SOIC/DIP

$2.00

SN65HVD1785

115 Kbps

Half

Wide Common Mode

SOIC/DIP

$1.85

SN65HVD1786

1 Mbps

Half

Wide Common Mode

SOIC/DIP

$1.85

SN65HVD1787

10 Mbps

Half

Wide Common Mode

SOIC/DIP

$2.00

SN65HVD1791

115 Kbps

Full

Wide Common Mode

SOIC

$1.90

SN65HVD1792

1 Mbps

Full

Wide Common Mode

SOIC

$1.90

SN65HVD1793

10 Mbps

Full

Wide Common Mode

SOIC

$2.05

SN65HVD1794

115 Kbps

Half

Cable Invert

SOIC

$1.95