ZigBee home automation gateway reference design

Features

• Simple API for home automation, incorporating TCP/IP to ZigBee bridge and enabling faster development of applications and easier integration of low power connectivity solutions
• CC2531-based USB Dongle running ZigBee Home Automation (HA 1.2) certified Protocol Stack, MAC & PHY and extensively tested for interoperability
• Based on the Sitara AM335x BeagleBone Black low-cost, open source, community-supported development platform and the SimpleLink™ ZigBee CC2531 wireless MCU based on small form-factor USB dongle
• All system hardware components available via TI's eStore or through authorized distributors. Wiki-based user guides also available to generate and compile Linux open-source components
• Off-the-shelf Linux-based system software & hardware implementation for connecting ZigBee sensors to TCP/IP applications via Ethernet, including all application, Linux middleware, ZigBee stack and firmware components
• Z-Stack™ Linux Gateway installer package for the BeagleBone Black and the ZigBee Home Automation stack for the SimpleLink CC2531 do

Parts Include:

AM3358             Sitara Processor 
CC2531              System-on-Chip Solution for IEEE 802.15.4 and ZigBee Applications 
SN74LVC1G06   Single Inverter Buffer/Driver With Open-Drain Output 
SN74LVC1G07  Single Buffer/Driver With Open-Drain Output 
SN74LVC1G74   Single Positive-Edge-Triggered D-Type Flip-Flop With Clear and Preset 
TL5209            Single Output, 500mA, Adjustable (1.3 to 6.5V), Low Noise LDO 
TPD4S012       4-Channel USB ESD Solution with Power Clamp 
TPS2051         0.7A, 2.7-5.5V Single Hi-Side MOSFET, Fault Report, Act-High Enable 
TPS769           10-V, 100-mA, Low Iq, Low-Dropout Linear Regulator 

Learn more by downloading the reference design below