Microcontroller minimizes RF
Microcontroller minimizes RF The 8XC575 is an 8051 variant with circuitry shaping to cut RF emissions by 20 dB. It includes a wide range ofContinue
Author: Electronic Products
Voice chip plays messages in EPROMs
Voice chip plays messages in EPROMs The VP1410 CVSD decoder runs from an external sampling clock at 9.6 to 128-Kbit/s sampling rates. A single EPROMContinue
Ethernet controller fits ISA, PCMCIA
Ethernet controller fits ISA, PCMCIA The 82595 Ethernet controller interfaces to either ISA or PCMCIA 2.0. The controller uses a DRAM chip for a localContinue
ICs target smart-card applications
ICs target smart-card applications ICs for smart-card applications include 1 to 16-Kbyte serial EEPROMs (AT24CXX and AT93CXX), the AT88SC200, a 2-Kbit serial EEPROM with
Multimedia chip offers multiple standards
Multimedia chip offers multiple standards The Vision Controller chip, along with the company's existing Vision Processor, needs only memory and programming to
MCU peripherals are field-programmable
MCU peripherals are field-programmable The PSD3XXL family of microcontroller peripherals operate from 3 to 5.5 V, with operating current about 1.A and 0.5 microamps
Logarithmic D/As for volume control
Logarithmic D/As for volume control The single-channel AD7111A and stereo AD7112 monolithic logarithmic D/A converters can attenuate an analog input signal over a 0
DTMF receiver offers power-down mode
DTMF receiver offers power-down mode The M-8870-02 DTMF receiver IC features a power-down capability that, when activated, reduces the current draw to less than
Zero-drift op amp achieves low noise
Zero-drift op amp achieves low noise The LTC1250 zero-drift op amp has typical 0.1 to 10-Hz noise of 0.65 microvoltsp-p while providing an output swingContinue
Dual-power op amp operates on 6 V
Dual-power op amp operates on 6 V The PA26 dual-power op amp is rated at a 3-A output current per amplifier. It has a common-modeContinue