Modem chipset fits in 1.5-in.sup2/sup area
Modem chipset fits in 1.5-in.2 area The V.32lite complete modem chipset for V.32 PCMCIA-card modems supports the AT command set, data compression, error control,
Author: Electronic Products
Electromechanical relays are small
Electromechanical relays are small The LQ52 series of electromechanical relays has 2 Form C bifurcated contacts in a 10-pin package that takes less than 0.2Continue
Jumping aboard the MIL-STD-1553 bus
MIL1553.OCT–UTMC–pm Jumping aboard the MIL-STD-1553 bus MIL-STD-1553 simplifies the implementation of a rugged monitoring and communications system BY TONY
Chipset for digital telephone-answering systems
Chipset for digital telephone-answering systems The Telephone Answering Device (TAD) chipset provides the core functionality for digital telephone-answering systems. It
Audio op amp uses all-FET signal path
Audio op amp uses all-FET signal path The OPA604 is a FET-input op amp optimized for audio use. It uses FETs throughout the signal path, including the input stage,
Op amp combines low voltage noise and THD
Op amp combines low voltage noise and THD The AD797 monolithic op amp has a voltage noise of 0.9 nV/ Hz at 1 kHz and THD of -120 dB at 20 kHz. In addition, the
Data acquisition chips run on single +5 V
Data acquisition chips run on single +5 V The LTC1293/4/6 are 12-bit A/D converters with on-chip sample and hold, and two-, six-, and eight-channel multiplexers,Continue
LCD driver IC allows battery operation
LCD driver IC allows battery operation The e1350 LCD driver IC operates on supply voltages as low as 3 V and typically uses only 95Continue
Prescalers and gain block amps use HBTs
Prescalers and gain block amps use HBTs A family of GaAs static prescalers and Gain Block amplifiers is based on the company's heterostructure bipolar
11-MHz op amp uses 1-mA supply current
11-MHz op amp uses 1-mA supply current The LT1200 is a unity-gain-stable voltage-feedback op amp with an 11-MHz unity-gain bandwidth and a 50-V/μs slew rate.Continue