TI PRU Cape is a BeagleBone Black Add-On Board
The PRU core is optimized for deterministic, real-time processing, direct access to I/Os and ultra-low-latency
Author: Rachel Kalina
TPS7A1633-Q1 Features Ultra-Low Quiescent Current and High Input Voltage
The TPS7A16xx-Q1 devices offer an enable pin (EN) compatible with standard CMOS logic and an integrated open-drain active-high power-good output (PG) with a
Texas Instruments’ TPIC8101 is a Knock Sensor Interface
This analog buffered output may be interfaced to an A/D converter and read by the microprocessor. The digital output may be directly interfaced to the
TLC6C5912-Q1 Complements Systems That Require Relatively Moderate Load Power
The TLC6C5912-Q1 contains a 12-bit serial-in, parallel-out shift register that feeds a 12-bit D-type storage register. Data transfers through both the shift and storage
TLC6C598-Q1 is an Automotive Power Logic 8-Bit Shift Register LED Driver
The serial output (SER OUT) clocks out of the TLC6C598-Q1 on the falling edge of SRCK provide additional hold time for cascaded applications. This provides improved
TPS92602-Q1 is a 2-Channel High-Side Current Sense Switching Mode LED Driver
Applications include automotive headlight LED drivers and high-brightness LED. TPS92602-Q1 has an input voltage of 4-40 and an output voltage of
PGA450-Q1 is an Automotive Ultrasonic Sensor Signal Conditioner
The PGA450-Q1 incorporates voltage regulators, a 12-bit SAR ADC, an 8-bit MCU, a digital band-pass filter, a DAC, dual NMOS low-side drivers, a low-noise amplifier, an
Texas Instruments’ TPIC8101 detects premature detonation in combustion engines
The two sensor channels of the TPIC8101 are selectable through the SPI bus. The knock sensor typically provides an electrical signal to the amplifier inputs. The sensed
MSP430FR6989 is a 16 MHz ULP Embedded MCU
The MSP430 ULP FRAM portfolio consists of a diverse set of devices that feature FRAM, the ULP 16-bit MSP430 CPU, and intelligent peripherals targeted for various
MSP430FR5739 is a Mixed Signal Embedded Microcontroller with 16-Bit RISC Architecture
The architecture, FRAM, and peripherals, combined with seven low-power modes, are optimized to achieve extended battery life in portable and wireless sensing