Data Sheet: ACPL-K30T-000E: Photovoltaic MOSFET Driver

The Avago ACPL-K30T is a photovoltaic MOSFET driver device specifically designed to drive high voltage MOSFETs.

The device consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to an output detector circuit. The detector consists of a photovoltaic diode array and a turn-off circuit. The photovoltaic driver is turned on upon a minimum input current of 10 mA through the input LED. The photovoltaic driver is turned off upon an input voltage of 0.8 V or less.

The ACPL-K30T is available in a stretched SO-8 package compatible with standard surface mount processes.

Avago R2Coupler isolation products provide reinforced insulation and reliability needed for critical automotive and high temperature industrial applications.

Features
    Qualified to AEC-Q100 Grade 1 Test Guidelines
    Operating Temperature Range: -40°C to +125°C 
    High Open Circuit Voltage: 7V typical at IF = 10mA 
    Short Circuit Current: 5µA typical at IF = 10mA
    Fast Switching Speed: 0.8ms TON, 0.04ms TOFF typical at IF = 10mA, CL = 1nF 
    Wide Operating VCC Range: 10 to 20V
    Photovoltaic Driver for Logic Level MOSFETs
    Compact SSO-8 Package with 8mm Clearance and Creepage
    Regulatory Approvals:
    – UL1577, CSA (5000VRMS for 1min)
    – IEC/EN/DIN EN 60747-5-5 (VIORM = 1140VPEAK)
    Available Options:
        500 = Tape and Reel Packaging Option
        XXXE = Lead Free Option

Applications
    Battery Insulation Resistance Measurement / Leakage Detection
    Battery Management System
    Solid State Relay Module