Advertisement

Dual-voltage RS-485/RS-422 transceiver with highest ESD protection

MAX14783E-
The MAX14783E is a 3.3V/5V ESD-protected transceiver intended for half-duplex RS-485/RS-422 communication up to 42Mbps. The device is optimized for high speeds over extended cable runs while maximizing tolerance to noise.
The MAX14783E integrated protection features include short-circuit-protected outputs, hot-swap functionality, and a true fail-safe receiver, guaranteeing a logic-high receiver output when inputs are shorted or open. Hotswap capability eliminates undesired transitions on the bus during power-up or hot insertion.
The transceiver draws 1.9mA (typ) supply current when unloaded or when fully loaded with the drivers disabled and draws less than 10µA (max) of supply current in low-power shutdown mode.
The MAX14783E is available in 8-pin µMAX, 8-pin SO, and small, 8-pin (3mm x 3mm) TDFN-EP packages. The device in the TDFN-EP package operates over the -40°C to +125°C temperature range. The MAX14783E in the µMAX and SO packages operates over the -40°C to +85°C and -40°C to +125°C temperature ranges.

Key Features:
Integrated Protection Increases Robustness
High ESD Protection
±35kV HBM ESD
±20kV Air Gap IEC 61000-4-2 ESD
±12kV IEC 61000-4-2 Contact ESD
Short-Circuit Protected Outputs
True Fail-Safe Receiver
Hot-Swap Capability
3V to 5.5V Supply Voltage Range
High-Speed Data Rates up to 42Mbps
-40°C to +125°C Operating Temperature
Allows Up to 32 Transceivers on the Bus
Low 10µA (max) Shutdown Current
Saves Board Space

Ava Applications/Uses:
Backplane Busses
Encoder Interfaces
Field Bus Networks
Motion Controllers ilable in 8-pin µMAX, SO, and TDFN-EP Packages

Advertisement



Learn more about Maxim Integrated

Leave a Reply