Mill-Max announced the availability of a new addition to its spring-loaded pin selection with the introduction of the 0973-0-15-20-77-14-11-0. This new offering has a solder cup designed to accept up to 20 AWG wire, has a maximum stroke of .080” (2,03 mm) and can be used at a minimum spacing of .100” (2,54 mm).
The shoulder and barb features are located and designed to allow easy and reliable assembly into connector housings. The terminating wires may be passed through a connector housing and soldered to the cup of the 0973. Once the soldering is complete the wires can now draw the 0973 spring pins into the housing and the spring pins can be secured with the press-fit. With the pins securely pressed into the housing, the shoulder acts as a stop, retaining the pins in the event the cable or wires are strained. The shoulder will also prevent push out of the spring pin if the plunger end is over compressed. These design features make the 0973 ideal for cable and bulkhead style connector assemblies.
Advertisement
Learn more about Mill-Max
