Microsemi Corporation, a leading provider of semiconductor technology aimed at building a smart, secure, connected world, today announced the development of enhancement-mode gallium nitride field-effect transistors (FETs) for satellites and other military power conversion, point-of-load, and high-speed switching applications. The FETs are built on a wide bandgap material, which increases performance over current radiation-hardened silicon MOSFETs. FETs provide the following features and benefits:
•Extremely low parasitic capacitance which reduces switching losses by at least 50 percent resulting in higher efficiency circuits
• Lower on-resistance to minimize conduction losses resulting in circuit efficiency gains
•Excellent radiation performance
Microsemi is working with Efficient Power Conversion (EPC) in the development of a complete line of high-performance FETS for high-reliability space and military applications.
The first new devices will be offered by Microsemi in voltages of 40, 60, 100, 150, and 200 V and will have drain-to-source on-resistance values of 4 to 100 mΩ. Additionally, the devices are expected to deliver excellent high-temperature performance with junction temperatures approaching 300°C. A family of standard through-hole and surface-mount packages in addition to flip chip die will be available. Preliminary radiation testing of the devices has shown high Single Event Effect (SEE) and Total Ionizing Dose (TID) capability. This allows the devices to operate in high orbit and deep space missions without degradation to performance. Microsemi will work closely with the Defense Logistics Agency (DLA) to define the test specifications within standard military drawings (MIL-PRF-19500 slashsheets), assuring customers of the performance capabilities of these products. A jointly researched paper entitled “Enhancement Mode Gallium Nitride Characteristics Under Long Term Stress” will be presented at the Government Microcircuit Applications and Critical Technology Conference (GOMAC), March 21-24, 2011 in Orlando, FL. The study covers the reliability testing results and demonstrates the stability of the devices at temperature and under radiation exposure.
Prototype customer samples are expected to be available by mid-2011 with production quantities by November 2011. A full description of these devices and technical datasheets are available by contacting Al Ortega at , or by calling (508) 365-7874, your local Microsemi sales representative. www.microsemi.com www.epc-co.com
Advertisement
Learn more about Microsemi
