Philips Lumileds Introduces LUXEON A, Its Latest Illumination Grade LED

Philips Lumileds Introduces LUXEON A, Its Latest Illumination Grade LED

Design simplification and quality of light are here to stay with hot testing and Freedom From Binning

San Jose, CA – LUXEON A introduced this week is the latest illumination grade LED from Philips Lumileds that reduces the engineering effort required for new solutions and delivers Freedom From Binning. LUXEON A shares the LUXEON Rebel ES platform and footprint and incorporates a 2 square millimeter thin film flip chip and Lumiramic phosphor technology to deliver the highest quality of light at 2700K and 3000K with very high efficacy and light output.

LUXEON A specifications at real-world operating conditions:
Tj 85°C, 700 mA.
CCT: 2700K, 3000K
CRI: Min 80
Color shift over temp.: Not Applicable
Color Bins: Not Applicable
Typ. Hot Flux:175+ lumens
Typ. Hot Efficacy: 100 lumens / Watt

All LUXEON A LEDs are hot-tested and specified at a junction temperature of 85°C that represents real-world operating conditions. Lumileds’ unique chip and phosphor technology allows color targeting that ensures all LUXEON A emitters fall within a single 3-step MacAdam ellipse on the black body curve. The quality, uniformity, and consistency of the light from LED to LED relieves luminaire manufacturers and lighting designers of many of their long held concerns about the suitability of LED technology for illumination applications.

“We are intent on delivering illumination grade LEDs that improve the state-of-the-art in lighting. Our LUXEON LEDs are delivering performance that does not require sacrifices in the quality of light for homes, restaurants, shops, and other applications in pursuit of energy efficiency and reduced operating costs,” said Steve Barlow, Senior VP Sales and Marketing.

Freedom From Binning gives the industry great confidence in quality of light and Lumileds’ hot testing pays dividends for the engineers that design LED solutions. The LED industry has long tested and specified products at an LED chip junction temperature of 25°C. It’s well known that in applications like down lights and retrofit lamps, LED junction temperatures are more likely to be near 85°C. This has meant that luminaire manufacturers have had to make many complex calculations to determine actual light output, efficacy, and color point of their products. Lumileds’ hot testing simplifies the entire process by providing the actual operating condition information so that there’s no ambiguity, performance hyperbole, or wasted engineering effort.

LUXEON A is available for sampling and design-in activities and will go into high-volume production in early May 2011.

www.philipslumileds.com